Post by moncefa33 on Jan 3, 2014 14:18:08 GMT -5
NICI
First of all I want to thank everyone for welcoming me at the last meet in Tama. I mainly lurk on these forums I don't post much at all but to pick up where I left off here are my previous toys.
98 GS400. Totally stock, got totaled in July 2013 (not my fault). Beautiful car.
01 Maxima. 3.6L VQ35 swapped, 5MT, 12:1 CR, JWT S1 cams, etc. Lots of fun doing this build but sold the car due to lack of software support and needing other unrelated work.
New project:
'02 Maxima 6MT. VQ35 from the factory. (some might ask but if you swap a VQ35 in a 95-01 Maxima, you will lose the VTCs, but this time around I have them).
Its also boosted. Bought the car non running and very fcked up, got it running after a short while.
Masterpower T70. Laggy AF. Cobra Injectors 39# (~470cc at 51psi fuel pressure). stock ECU, KS unplugged to kill timing at WOT (8-10 degrees :x), SAFC to control the injectors. 7psi. This is not a permanent setup, this was just to get the car moving under its own power. It has a lot of potential left in it. Gotta address other parts of the car first.
Pics!
Straight off the trailer into the garage.
In the air, uninstalling the junk UTEC, installing new wideband etc.
Drove it home, bumpers need to be fitted, needs new wheels, and a new FMIC (this one is dropping 5-7psi). Also needs massive cleanup under the hood.
Cleaned up a little bit. Got a long road ahead of me but I'm excited to play with boost.
BTW: I do have a GReddy Profec e01 electronic boost controller for sale if anyone is interested they can post in here also.
First of all I want to thank everyone for welcoming me at the last meet in Tama. I mainly lurk on these forums I don't post much at all but to pick up where I left off here are my previous toys.
98 GS400. Totally stock, got totaled in July 2013 (not my fault). Beautiful car.
01 Maxima. 3.6L VQ35 swapped, 5MT, 12:1 CR, JWT S1 cams, etc. Lots of fun doing this build but sold the car due to lack of software support and needing other unrelated work.
New project:
'02 Maxima 6MT. VQ35 from the factory. (some might ask but if you swap a VQ35 in a 95-01 Maxima, you will lose the VTCs, but this time around I have them).
Its also boosted. Bought the car non running and very fcked up, got it running after a short while.
Masterpower T70. Laggy AF. Cobra Injectors 39# (~470cc at 51psi fuel pressure). stock ECU, KS unplugged to kill timing at WOT (8-10 degrees :x), SAFC to control the injectors. 7psi. This is not a permanent setup, this was just to get the car moving under its own power. It has a lot of potential left in it. Gotta address other parts of the car first.
Pics!
Straight off the trailer into the garage.
In the air, uninstalling the junk UTEC, installing new wideband etc.
Drove it home, bumpers need to be fitted, needs new wheels, and a new FMIC (this one is dropping 5-7psi). Also needs massive cleanup under the hood.
Cleaned up a little bit. Got a long road ahead of me but I'm excited to play with boost.
BTW: I do have a GReddy Profec e01 electronic boost controller for sale if anyone is interested they can post in here also.
