|
Post by s14boy on Apr 22, 2014 21:47:21 GMT -5
Hey guys I haven't been to an event to actually meet any of you in person but I am having problem with a MSPNP2 unit for DIY auto tune it has tested fine with them on there labs but has failed every test of mine. When the ecu is connected on my car with there aftermarket trigger disk my distributor fries after 2-3 mins of cranking. Basically what I am looking for is someone who is willing to run the ecu in there car. I will provide my own distributor just in case it fries like it has with my car.
plan for my test are as follows:
1. Replace your dizzy with my own 2. Start car to make sure its functioning correctly 3. Replace your stock ecu with my MSPNP2 unit 4. Start car and hope it doesn't work so I can return this pos and go AEM, but if it does work proceed to next step 5. Install aftermarket trigger disk in ECU if it works I am going to burn my car if it doesnt... hello AEM series 2
I am living in ames at the moment and if someone close is willing to help me out I would be grateful. My names Mike and my number 847-323-7159
Thanks
|
|
|
Post by s14boy on Apr 23, 2014 21:45:14 GMT -5
Thanks Jason for moving the correct spot i wasnt to sure where to put it.
|
|
|
Post by Jason on Apr 24, 2014 12:43:21 GMT -5
No problem. I hope you are able to get things figured out.
|
|
|
Post by eerakuho on May 20, 2019 3:45:41 GMT -5
|
|
|
Post by etarihvoqoti on Sept 2, 2019 5:37:12 GMT -5
|
|